China D35488 Rear Dana35 Planetary Gearbox Transmission Helical Bevel Gear for 18-21 Jeep Jl CZPT

Product Description

Product Description

Car Fitment Jeep Wrangler
OE No. D35488
Speed Ratio 8*39
Type Differential Gear
Material 20CrMnTi/ 8620
Hardness HRC58-62
Treatment Carburizing,Hardening,
tempering,high frequency treatment,black coating,zincing,nickelage

We can make all kinds of Crown Wheel Pinion as per your drawing or sample by our DHL account.
 

D3571 11/41 CJ5/7/8 DANA 30 FRONT STD.3.73 72-86
D3571TJ 11/41 TJ (97-06) FRONT DANA 30 3.73 (SHORT STYLE)
D3571 10/41 CJ5/7 DANA 30 FRONT STD.4.10
D3571R 10/41 YJ(87-95) FRONT DANA 30 REVERSE 3.73 XJ(84-91)
D3571TJ 10/41 TJ (97-06) FRONT DANA 30 4.10 (SHORT STYLE)
D3 0571 9/41 CJ5/7/8 DANA 30 FRONT STD.4.56 72/86
D3 0571 R 9/41 YJ(87/95) FRONT DANA 30 REVERSE 4.56 XJ(84-91)
D3 0571 TJ 9/41 TJ(97-06( FONT DANA 304.56 (SHORT STYLE) XJ(92-01)
D30488 8/39 CJ5/7 DANA 30 FRONT STD.4.88 72-86
D30488R 8/39 YJ(87-95) FRONT DANA DANA 30 REVERSE 4.88 XJ(84-91)
D30488TJ 8/39 TJ FRONT DANA 30 4.88 (SHORT STYLE)
D3571JK 8/41 YJ(07-21) FRONT DANA30 5.13 
D35712(47715) 18/49  
D35373 11/41 YJ/TJ DANA 35 REAR 3.73
D35411 10/41 YJ87-95 /TJ97-06/XJ93-07 DANA 35 REAR 4.10
D35456 9/41 YJ/TJ DANA 35 REAR 4.56
D35488 8/39 YJ/TJ DANA 35 REAR 4.88
D44373 11/41 TJ REAR DANA 44 3.73
D44409 11/45 TJ REAR DANA 44 4.10 22745
D44456R 9/41 DANA 44 4.56 REVERSE
D44455 11/50 TJ REAR DANA 44 4.56 22105
D44455X 11/50  
D44488R 8/39 DANA 44 4.88 REVERSE
D44489 9/44 TJ REAR DANA 44 4.88 23053
D44489X 9/44  
D44488X 8/39 RUBICON FROUT/REAR DANA 44 4.88
D44513R 8/41 DANA 44 5.13 REVERSE
D44513 8/41 TJ REAR DANA 44 5.13
D44513X 8/41 RUBICON FROUT/REAR DANA 44 5.13
D5 0571 Sep-41  
D50488 Aug-39  
D5571 Aug-41  
D44-4-373 Nov-41 85719
D44-4-342 Dec-41 80364
D44-4-353 46/13 75945
D44-4-307 43/14  
D44-4-346 Nov-38 84707
D44463 37*8 74960
D44410 41*10 80320
D44373 41*11 22736X
D44456 41*9 85713
D44323 42*13 28744
D44331 43*13 23592X
D44307 43*14 22106X
D44354 46*13 22856X
D44427 47*11 23064 JEEP WILLYS 11*47 8125051 ANO 1985(CJ6)
D44427X 47*11 CHRYSLER
D44538 43*8  
D44-3-342 41*12 660150
D6571 37*9 74905 CZPT 3F,D60-411,9X37
D6571 41*10 24807(FORD250)
D6571 41*11 25538
D6 0571 46*13 24813
D6 0571 41*9 FORD F250
D6 0571 X 41*9  
D6571 41*8  
D6571R 41*8  
D60586 41*7  
D6571 43*8 Isuzu NHR,D60-586 7*41
D6571R 43*8  
D60488 39*8  
D60488R 39*8  
D70488 39*8 72148
D7571 41*10 72153
D7571 41*11 72159
D7571 41*8 72150 C30/P30 F350 41*8 5.3
D7 0571 41*9 72152 CZPT F350 75-80
D7 0571 X 46*13 72168
D70-1-410 41*10 72154 CZPT F350 BAJA 75/80 41*10 4.10
D70586 41*7 72156 D300/P300 41*7 5.86
D75-410 41*10 BA457171-X CZPT Cargo
D75-462 37*8 BA457104-X
D8571 41*8 73168
D8571 41*10 73200
D8571X 41*40  
D80430 43*10 76128
D80488 39*8 76138
D80463 37*8 73167
D8571 41*11 76256
D8 0571 46*13 73353

Company Profile

 

HangZhou CZPT Machinery is a professional manufacture of spiral bevel gear. The company has CNC milling machine, the GLEASON milling machine, rolling inspection machine, gear measuring center, a full set of metallographic analysis, inspection equipment and other related advanced equipment.
Our company owns gear measuring center equipped with advanced testing machines such as contourgraph, universal measuring microscope and full set netlaaographic analysis detector. According to various technical requirements and through procedures of sampling, special inspection and re-examination, multi-indexes of gears like observation, measurement and tracking can be completed.
With our high quality products, high credibility and trusty cooperation, aiming to be a highly specialized gear manufacturer of high level and all-directional service,we are looking forward to your  business negotiation and our promising cooperation.

 

FAQ

Q1: Are your products standard?
A: Our model is standard, if you have specific demand, pls tell us the details. 
Q2: What is you main categories?
A: Commercial Vehicles Like Isuzu,Nissan, Hino, CZPT ,Toyota , Mazda ,Suzuki, Agricultural Machinery and Electric Storage.
Q3: If we don’t find what we want on your website, what should we do? 
A: You can email us the descriptions and pictures of the products you need, we will check whether we have them. 
B: We develop new items every month, and some of them have not been uploaded to website in time. Or you can send us sample by express, we will develop this item for bulk purchasing. 
Q4: What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages before you pay the balance.
Q5:Do you test all your goods before delivery?
Yes, we have 100% test before delivery.

Planetary Gearbox

This article will explore the design and applications of a planetary gearbox. The reduction ratio of a planetary gearbox is dependent on the number of teeth in the gears. The ratios of planetary gearboxes are usually lower than those of conventional mechanical transmissions, which are mainly used to drive engines and generators. They are often the best choice for heavy-duty applications. The following are some of the advantages of planetary gearboxes.
planetarygearbox

planetary gearboxes

Planetary gearboxes work on a similar principle to solar systems. They rotate around a center gear called the sun gear, and 2 or more outer gears, called planet gears, are connected by a carrier. These gears then drive an output shaft. The arrangement of planet gears is similar to that of the Milky Way’s ring of planets. This arrangement produces the best torque density and stiffness for a gearbox.
As a compact alternative to normal pinion-and-gear reducers, planetary gearing offers many advantages. These characteristics make planetary gearing ideal for a variety of applications, including compactness and low weight. The efficiency of planetary gearing is enhanced by the fact that 90 percent of the input energy is transferred to the output. The gearboxes also have low noise and high torque density. Additionally, their design offers better load distribution, which contributes to a longer service life.
Planetary gears require lubrication. Because they have a smaller footprint than conventional gears, they dissipate heat well. In fact, lubrication can even lower vibration and noise. It’s also important to keep the gears properly lubricated to prevent the wear and tear that comes with use. The lubrication in planetary gears also helps keep them operating properly and reduces wear and tear on the gears.
A planetary gearbox uses multiple planetary parts to achieve the reduction goal. Each gear has an output shaft and a sun gear located in the center. The ring gear is fixed to the machine, while the sun gear is attached to a clamping system. The outer gears are connected to the carrier, and each planetary gear is held together by rings. This arrangement allows the planetary gear to be symmetrical with respect to the input shaft.
The gear ratio of a planetary gearbox is defined by the sun gear’s number of teeth. As the sun gear gets smaller, the ratio of the gear will increase. The ratio range of planetary gears ranges from 3:1 to 10 to one. Eventually, however, the sun gear becomes too small, and the torque will fall significantly. The higher the ratio, the less torque the gears can transmit. So, planetary gears are often referred to as “planetary” gears.
planetarygearbox

Their design

The basic design of a Planetary Gearbox is quite simple. It consists of 3 interconnecting links, each of which has its own torque. The ring gear is fixed to the frame 0 at O, and the other 2 are fixed to each other at A and B. The ring gear, meanwhile, is attached to the planet arm 3 at O. All 3 parts are connected by joints. A free-body diagram is shown in Figure 9.
During the development process, the design team will divide the power to each individual planet into its respective power paths. This distribution will be based on the meshing condition of all gears in the system. Then, the design team will proceed to determine the loads on individual gear meshes. Using this method, it is possible to determine the loads on individual gear meshes and the shape of ring gear housing.
Planetary Gearboxes are made of 3 gear types. The sun gear is the center, which is connected to the other 2 gears by an internal tooth ring gear. The planet pinions are arranged in a carrier assembly that sets their spacing. The carrier also incorporates an output shaft. The 3 components in a Planetary Gearbox mesh with each other, and they rotate together as one. Depending on the application, they may rotate at different speeds or at different times.
The planetary gearbox’s design is unique. In a planetary gearbox, the input gear rotates around the central gear, while the outer gears are arranged around the sun gear. In addition, the ring gear holds the structure together. A carrier connects the outer gears to the output shaft. Ultimately, this gear system transmits high torque. This type of gearbox is ideal for high-speed operations.
The basic design of a Planetary Gearbox consists of multiple contacts that must mesh with each other. A single planet has an integer number of teeth, while the ring has a non-integer number. The teeth of the planets must mesh with each other, as well as the sun. The tooth counts, as well as the planet spacing, play a role in the design. A planetary gearbox must have an integer number of teeth to function properly.

Applications

In addition to the above-mentioned applications, planetary gearing is also used in machine tools, plastic machinery, derrick and dock cranes, and material handling equipments. Further, its application is found in dredging equipment, road-making machinery, sugar crystallizers, and mill drives. While its versatility and efficiency makes it a desirable choice for many industries, its complicated structure and construction make it a complex component.
Among the many benefits of using a planetary gearbox, the ability to transmit greater torque into a controlled space makes it a popular choice for many industries. Moreover, adding additional planet gears increases the torque density. This makes planetary gears suitable for applications requiring high torque. They are also used in electric screwdrivers and turbine engines. However, they are not used in everything. Some of the more common applications are discussed below:
One of the most important features of planetary gearboxes is their compact footprint. They are able to transmit torque while at the same time reducing noise and vibration. In addition to this, they are able to achieve a high speed without sacrificing high-quality performance. The compact footprint of these gears also allows them to be used in high-speed applications. In some cases, a planetary gearbox has sliding sections. Some of these sections are lubricated with oil, while others may require a synthetic gel. Despite these unique features, planetary gears have become common in many industries.
Planetary gears are composed of 3 components. The sun gear is the input gear, whereas the planet gears are the output gears. They are connected by a carrier. The carrier connects the input shaft with the output shaft. A planetary gearbox can be designed for various requirements, and the type you use will depend on the needs of your application. Its design and performance must meet your application’s needs.
The ratios of planetary gears vary depending on the number of planets. The smaller the sun gear, the greater the ratio. When planetary stages are used alone, the ratio range is 3:1 to 10:1. Higher ratios can be obtained by connecting several planetary stages together in the same ring gear. This method is known as a multi-stage gearbox. However, it can only be used in large gearboxes.
planetarygearbox

Maintenance

The main component of a planetary gearbox is the planetary gear. It requires regular maintenance and cleaning to remain in top shape. Demand for a longer life span protects all other components of the gearbox. This article will discuss the maintenance and cleaning procedures for planetary gears. After reading this article, you should know how to maintain your planetary gearbox properly. Hopefully, you can enjoy a longer life with your gearbox.
Firstly, it is important to know how to properly lubricate a planetary gearbox. The lubricant is essential as gears that operate at high speeds are subject to high levels of heat and friction. The housing of the planetary gearbox should be constructed to allow the heat to dissipate. The recommended oil is synthetic, and it should be filled between 30 and 50 percent. The lubricant should be changed at least every 6 months or as needed.
While it may seem unnecessary to replace a planetary gearbox, regular servicing will help it last a long time. A regular inspection will identify a problem and the appropriate repairs are needed. Once the planetary gearbox is full, it will plug with gear oil. To avoid this problem, consider getting the unit repaired instead of replacing the gearbox. This can save you a lot of money over a new planetary gearbox.
Proper lubrication is essential for a long life of your planetary gearbox. Oil change frequency should be based on oil temperature and operating speed. Oil at higher temperatures should be changed more frequently because it loses its molecular structure and cannot form a protective film. After this, oil filter maintenance should be performed every few months. Lastly, the gearbox oil needs to be checked regularly and replaced when necessary.

China D35488 Rear Dana35 Planetary Gearbox Transmission Helical Bevel Gear for 18-21 Jeep Jl CZPT  China D35488 Rear Dana35 Planetary Gearbox Transmission Helical Bevel Gear for 18-21 Jeep Jl CZPT